Exam 220-601, Best IT Certification Training

After you read your press books about Comptia exam, and finish your first stage of your Comptia study, do you want to know how well you have absorbed the knowledge? Here are some practice questions about Comptia exam, no matter you are preparing 220-601 or 220-602, you also can do these questions.

1. Event Viewer contains Errors, Warnings and Information. True/False
True

2. You are working on a machine and notice the fan is not running. The most likely cause is that the power supply is defective.
True

3. PCI has a bus width of 16, 32 and 64 bits. True/False
False. It has a bus width of 32 and 64 bits.

4. 850 MHz bus speed is associated with PCR3200 RAM. True/False
False. 800 MHz is associated.

5. The wireless specification 802.11n provides the fastest file transfer rate. True/False
True

6. To start a computer in safe mode, the combination of Ctr-Shift-Esc is used. True/False.
False. You start a computer in safe mode by pressing the F8 key.

7. The motherboard type NLX can use a riser card. True/False
True

8. WUXGA provide the highest resolution. True/False.
True

9. BTFS is the organization responsible for regularing wireless radio frequencies. True/False
False. It's FCC

10. Regedit is the most appropriate utility to disable startup files when troubleshooting startup problems. True/False
False. The utility is Msconfig

11. In order to print multipart forms, you will need to use a laser printer. True/False
False. You will need to use a Dot-matrix printer.

12. An Antistatic wrist strap should be connected to the square hole in an outlet. True/False
False. It should be connected to the round hole.

13. 15 pins are on a typical VGA cable connector. True/False
True

14. In order to insert a USB device onto your computer, you first need to power down the computer, else the device will not be recognised. True/FAlse
False. USB devices are capable of being hot swapped. There is no need to power down the computer first.

15. In a laptop, the BIOS-ACPI is a Power Management Specification. True/False
True